1 series aluminum alloy , industrial aluminum, aluminum content are more than 99.00%. Good conductivity, good corrosion resistance, dissolve latent heat, light reflectance, good welding performance, low-intensity, non-heat-strengthened. Mainly used for general industrial equipment, daily life utensils, storage, scientific experiments, the chemical industry and other purposes.
Alloy: 1,050,106,011,001,070
Alloy Status: O / H111 H112 H12 / H22 / H32 H14 / H24 / H34 H16 / H26 / H36 H18 / H28 / H38 H114 / H194
Specifications: Thickness ≤30mm (checkered plate thickness <6mm)
Width ≤2200mm
length ≤12000mm or coil (C)
Uses: non-slip tread plate, caps, industrial equipment and storage containers, metal cans, and other types of containers
Aluminum factory production process:
The primary aluminum production process generally includes the following process, the following explanation to us one by one.
The first step of course is the ingredients. Pick and choose the type of information in accordance with the data, standards, and color, and then cut.
The second step is the cut. When cutting aluminum, after adjusting the standard cut a small point, check is not consistent. And then to cut the aluminum plate. Cut hours, left to right, top to bottom to ensure the accurate direction. Upon completion of inspection carried out, then the aluminum plate on a clean ground.
The third section is the gouging. Aluminum planing division of watching the work order Fig secondary must confirm stereotypes. Avoid mistakes.
The fourth section that is bent. This division can not pay attention to repeated folding, do first and foremost is to avoid fatigue damage aluminum can not be used.
The fifth step is the set of plates reinforced. Operate without endangering plate finishes.
aluminum alloy 1060 production maintenance method:
We all know that stable performance aluminum, aluminum surface after treatment is very easy to maintain, the aluminum plate for use in daily life after we just use water to clean the surface, can be stored in this there are some small details to remind you:
1 temperature exceeds 40 ° C of aluminum do not directly cleaned because the cleaning rapid evaporation of water on the surface of the aluminum sheet surface paint harmful!
2 When selecting aluminum detergent, be sure to use a neutral detergent! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strongly acidic detergents, abrasive detergent and paint soluble washing agent.