We need pay attention to Packaging techniques of aluminum coils,what is the packaging techniques of aluminum coils
aluminium coils for building of conventional packaging: the thickness of more than 0.05mm and above the hard state of the aluminium coils for construction, the general can be well frame packaging, the packaging should be consistent with the requirements of storage and transportation. The top of the wooden frame is made of wood, the upper and lower sides of the two wooden composition, the height of the next side of the wood should meet the requirements of the work of the car, made on the wooden side with the radial radial corresponding to the shape of the upper and lower sides with a screw fixed , The screw length should be lower than the upper side of the circular arc surface in order to avoid stabbing aluminium coils painted, product inspection and stamped with the seizure.
First, the aluminum coil should be wrapped around a solid neutral or weak acid material, and release Packing list, lap tape with glue. Soft pad on end face to protect end of aluminum case.
Second, add the desiccant, with the entire plastic sheeting wrapped the entire volume, lap at the outer layer of plastic cloth down and stick with tape, the plastic sheeting at both ends of the excess part of the plug tube die.
Finally, the size of the rain-proof cardboard along the circumference wrapped with aluminum and the entire volume of both ends of the closure, the end surface and the circumference of the junction and all the gaps are bonded with tape. The wrapped aluminum coil and roll is placed on the frame and fixed along the circumference of the steel strip. In the packaging of good aluminium coils for building materials on the end of the volume of a box card. This way you can more directly see the parameters of the aluminum volume!