﻿ 1mm Aluminium Sheet Weight_aluminum sheet ﻿
• News Center
• 1mm Aluminium Sheet Weight
• The density of aluminum sheet is approximately 2.7g/cm³, so the 1mm aluminium sheet weight per square meter of aluminum sheet can be calculated using the following formula: Weight per square meter of aluminum sheet (kg) = Thickness of aluminum sheet (mm) × Width of aluminum sheet (m) × 2.7. For example, the weight per square meter of an aluminum sheet with a thickness of 1mm and a width of 1m is 2.7kg. It should be noted that the thickness of the aluminum sheet in the above formula refers to the actual thickness, not the surface thickness. This is because the surface of aluminum sheet is often subjected to processes such as stretching, embossing, or coating, so there may be differences between the surface thickness and the actual thickness.

Factors Affecting the 1mm aluminium sheet weight:
1. Thickness of aluminum sheet: The thicker the aluminum sheet, the greater the weight.
2. Width of aluminum sheet: The width of aluminium sheet is also a factor that affects the weight. Generally, the wider the aluminum sheet, the greater the weight.
3. Length of aluminum sheet: The influence of the length of the aluminum sheet on the weight is small and can be ignored.
4. State of aluminum sheet: The state of aluminum sheet (soft, hard, semi-hard) also affects its weight.
5. Aluminum alloy composition: Aluminum sheets are made of different aluminum alloys, and different aluminum alloy compositions can lead to differences in weight.

Therefore, when calculating the 1mm aluminium sheet weight per square meter, besides considering the actual thickness and width of the aluminum sheet, the influence of the above factors should also be taken into account. In conclusion, the calculation of the weight per square meter of aluminum sheet needs to be based on specific conditions and is affected by multiple factors. Through the introduction in this article, it is believed that readers have gained a more comprehensive understanding of the issue of weight per square meter of aluminum sheet.

• Return list