According to the 5052 h32 aluminum properties, its application scope are oil storage tanks, gas storage tanks, car tool boxes, aircraft oil pipes, other accessories for automobiles. The 5052 H32 aluminum is often processed in aluminum sheet type, the alloy temper is h32, the 5052 h32 aluminum plate thickness: 0.15-600mm, the processing technology is hot rolling. H32 temper is not a heat treatment state, but a work hardening state. H32 temper stands for after work hardening, it is a 1/4 hard state that has been stabilized. The 5052 h32 aluminum sheet has a superior anodizing finish that can be matched with any color and produces an attractive, high-tech look.
5052 h32 aluminum properties are shown in many aspects, let see them one by one. The first is bending radius. The bending radius is the radius of curvature, in layman's terms, a very small segment on the curve is replaced by an arc. The radius of this circle is the bend radius. The bending radius of 5052 H32 is 1.5t. 5052 aluminum plate can generally meet 90 degree bending and shallow stretching, and the stamping requirements are not cracked. However, if it is deep drawn, it may still crack.
The tensile strength of 5052 h32 aluminum plate is 210-260, the tensile strength is the critical value of the transition of metal from uniform plastic deformation to local concentrated plastic deformation, and it is also the maximum bearing capacity of metal under static tensile conditions.
The non-proportional elongation strength specified by 5052 H32 aluminum properties is 130; the specified non-proportional elongation strength Rp is defined as the stress when the non-proportional elongation is equal to the specified percentage of the gauge length of the extensometer, and Rp0.2 is the specified stress when the gauge length of the extensometer is 0.2%.